![background image](http://html.mh-extra.com/html/miele/g-1021/g-1021_operating-instructions-manual_234594019.webp)
^
Remove the lower basket and
unscrew the salt reservoir cap.
Only open the salt reservoir when
you want to fill it with dishwasher salt
as water or salt solution will run out
of the reservoir when the cap is
removed.
^
Fill the reservoir with approx. 2 litres
of water (first use only).
^
Place the funnel provided over the
salt reservoir and carefully fill with
salt until the reservoir is full. The salt
reservoir holds approx. 2 kg of salt
depending on the brand used.
^
Clean any excess salt from around
the reservoir opening and then screw
the cap on again
firmly
.
^
Run the
9
40 °C programme imme-
diately (without any crockery in the
dishwasher) to remove any traces of
salt from the cabinet.
Salt refill indicator
F
^
Fill the salt reservoir with dishwasher
salt when the salt refill indicator
F
comes on. (If it comes on during a
programme, wait until the end of the
programme).
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is run. The salt refill
indicator may still be illuminated during
this process. It will go out once the salt
concentration has reached the correct
level.
The salt refill indicator will not come on
if the dishwasher has been
programmed for a water hardness level
of less than 0.7 mmol/l (4°d, German
scale).
,
After filling the salt reservoir, run
the
9
40 °C immediately (without
any crockery in the dishwasher) to
remove any traces of salt from the
cabinet.
Before using for the first time
19
Summary of Contents for G 1021
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved G1021 G1022 G2021 G2022 0410 M Nr 07 502 050 01 ...