Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a
recommended setting of approx. 3 ml
at the factory.
If spots appear on crockery and
glassware:
^
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
^
Decrease the rinse aid dosage.
^
Switch the dishwasher off using the
K
button.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button
J
/
M
in,
and
whilst holding it in
switch the
dishwasher on using the
K
button.
Keep the
J
/
M
button pressed in
until the
J
/
M
indicator light comes
on.
If this does not happen, start the
procedure from the beginning again.
^
Turn the programme selector to the
"5 o'clock" position.
The
8
programme sequence indicator
will flash briefly three times at intervals.
This means that approx. 3 ml of rinse
aid will be used per programme
(factory default setting).
The number of times the
8
programme
sequence indicator flashes tells you the
rinse aid dosage which has been set
(see chart).
Rinse aid
in ml
8
Flash frequency
0
-
1
Once
2
Twice
3
Three times
4
Four times
5
Five times
6
Six times
^
Use the
J
/
M
button to select the
number of flashes which equates to
the rinse aid dosage you want.
Each press of the button moves you
up a level.
The programmed rinse aid dosage is
now stored in memory.
^
Switch the dishwasher off using the
K
button.
Before using for the first time
22
Summary of Contents for G 1021
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved G1021 G1022 G2021 G2022 0410 M Nr 07 502 050 01 ...
