Installation
76
– Fitting the soft-close mechanism
Insert the soft-close mechanism
on the door hinge side (at an angle
initially) so that it clicks into position.
Then press the other end of the soft-
close mechanism into the opening.
Secure the soft-close mechanism
with the screw
.
Push the hinged arm
into the
opening on the door hinge.
Insert the pin
into the door hinge
from above. Turn this with a
screwdriver (by approx. ¼ turn) until
both lugs on the pin click into
position correctly in the grooves.
Pull out the red safety device
.
Tip:
Keep the red safety device in case
you want to change the door hinging
again at a later date.
Fit the cover
on the door hinge.
Fit the panel
so that it clicks into
position.
1
Push on the outer cover
.
Close the appliance door.
If you intend to install your appliance
“side-by-side” with another
refrigeration appliance, please ensure
that you observe the instructions in
“Installing in a side-by-side
combination”. The necessary
installation parts are supplied with
your appliance.
Summary of Contents for FNS 28463 E ed/cs
Page 28: ...Using Super freeze 28 The current temperature appears in the display lights up orange ...
Page 101: ......
Page 102: ......
