manualshive.com logo in svg

Miele FNS 28463 E ed/cs, Operating And Installation Instructions

Share
Download
Miele FNS 28463 E ed/cs Operating And Installation Instructions Download Page 45

Freezing and storing food

45

If 

 begins to flash in the display, this

means that there is still water remaining
in the ice cube maker.

Leave the ice cube maker on for
another day so that the remaining ice
cubes can be produced.

Turn the ice cube maker off as soon
as the remaining ice cubes have been
produced.

Take the remaining ice cubes out of
the ice cube drawer and dispose of
them.

Using accessories

Freezer tray

The lowest freezer drawer in your
appliance can be used as a freezer tray.

The freezer tray can be used to
effectively freeze small items such as
berries, herbs, vegetables etc.

The food keeps it shape and generally
does not freeze together in a lump.

Space the food out loosely on the
tray.

Leave to freeze for 10 to 12 hours. Then
fill in freezer bags or containers and
place in the freezer drawers.

Summary of Contents for FNS 28463 E ed/cs









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands