Changing the bearing
Important! The height of the
appliance door can be adjusted on
this stainless steel appliance.
Please take note of the different
conversion and fitting
instructions.
From "Fitting the appliance door"
onwards, the conversion and
fitting instructions are the same
for all appliances.
A. For appliances without height
adjustment (white appliance)
^
Pull hinge pin
a
with disc
b
upwards to remove them.
^
Remove cap
c
.
^
Undo screws
d
and take hinge plate
e
off.
^
Unscrew bearing
f
from hinge plate
e
, rotate it by 180° and refit into the
hole on the opposite side of the hinge
plate.
^
Place cap
c
in the other hole.
^
Remove cover
g
.
^
Undo screw
h
and screw it into the
outermost hole on the other side.
^
Rotate cover
g
by 180° and click it
into the holes on the other side.
^
Screw hinge plate
f
into position on
the opposite side using the two
outer
long slots only. Do not use the
middle
screw because you will not
be able to align the door over the
outer long slots later on.
^
Reinsert hinge pin
a
with disc
b
.
Important! The lug on the hinge pin
must face backwards.
B. For appliances with height
adjustment (stainless steel
appliance)
^
Undo grub screw
c
with a full turn of
the Allen key supplied.
^
Unscrew hinge pin
a
with disc
b
and pull upwards to remove them.
^
Remove cap
d
.
Changing the door hinging
50
