Sliding the appliance into the
installation niche
If a side-by-side installation is
desired, connect the two appliances
together. See the Installation Manual
included with the "Merging Kit".
^
Unscrew the plinth.
^
To protect the corners of the
installation space, attach the
supplied edge protector
a
on both
sides with adhesive tape.
^
Plug the appliance into the power
outlet
b
.
The plug of the appliance should be
easily accessible after installation.
If the plug is not accessible after the
appliance has been installed,
disconnection from the power
supply should be completed via the
circuit breaker.
In the case of side-by-side
installations, a separate outlet must
be used for each appliance.
^
To prevent the power cord from
becoming caught:
Tie a piece of string to the middle of
the power cord and feed it forward
under the appliance. When sliding
the appliance in, pull the cable
forward
c
.
^
Carefully slide the appliance into the
space until the height-adjustable
wheels interlock with the anti-tip
brackets
d
.
If resistance is felt when attempting to
slide the appliance into the installation
niche - for example, because the floor
is uneven,
^
Turn the rear adjustable wheels
slightly outward (see "Aligning the
appliance"), then push the appliance
in.
Be careful not to damage the water
pipe or power cord attached to the
floor.
^
Remove the edge protector
a
.
Installing the appliance
62
Summary of Contents for F 1811 Vi
Page 44: ...44 ...
Page 53: ...Niche dimensions Niche width A F 18X1 Vi 30 762 mm F 19X1 Vi 36 915 mm Dimensions 53 ...
Page 79: ...79 ...
