Miele EXCELLA G 2630 SCI Operating Instructions Manual Download Page 55

Page: 55 / 72

Issue

Possible fault

Solution

Dishes are not dry,
glasses and cutlery
are spotted?

The rinse aid setting may be
too low or the rinse aid
reservoir is empty.

Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".

Dishes were taken out too
soon.

Leave dishes in longer, see
"Use".

"2 in 1" or "3 in 1" products
were used. These products
have a low drying effect.

Set the detergent type to
"Powder" and insert rinse
aid. See "Settings

Detergent".

The detergent "2 in 1" or
"3 in 1" is set, but another
product was used.

Select the detergent setting
to the detergent used. See
"Settings

- Detergent".

White residue is
visible on cutlery
and dishes,
clouding occurs on
glassware and film
can be wiped off.

Not enough rinse aid was
used.

Increase the dosage, see
"Before using for the first
time".

The salt container is empty.

Increase the dosage, see
"Before using for the first
time".

The salt container lid was
not screwed on properly.

Reseat and screw the lid on
firmly.

Unsuitable "2 in 1" or "3 in 1"
products were used.

Use a different detergent.
Try using normal tabs or
normal powder detergent.

The automatic water
softener unit is defective.

Contact Miele Technical
Service.

Frequently asked questions

Summary of Contents for EXCELLA G 2630 SCI









































































Search results

Summary of Contents for EXCELLA G 2630 SCI

Reviews:

Related manuals for EXCELLA G 2630 SCI

Brands by name

Popular brands

Miele EXCELLA G 2630 SCI, Operating Instructions Manual

Search results

Summary of Contents for EXCELLA G 2630 SCI

Reviews:

Related manuals for EXCELLA G 2630 SCI

Brands by name

Popular brands