Miele EXCELLA G 2630 SCI Operating Instructions Manual Download Page 45

Page: 45 / 72

Temperature

The temperature can be displayed in
"°C/Celsius" or "°F/Fahrenheit".

The temperatures are shown in
°C/Celsius by default.

Select the desired temperature unit
and confirm with OK.

Buzzer

When the buzzer is activated, a tone
sounds at the end of a program and if a
fault occurs.

The buzzer at the end of a program is
turned on by default.

Buzzer at the end of a program

The buzzer at the end of a program
sounds five times in intervals with a brief
break in between. The buzzer sounds up
to one hour if the dishwasher in not
turned off.

Buzzer in case of a fault

The buzzer for a fault sounds
continuously. The buzzer sounds up to
two minutes if the dishwasher is not
turned off or the fault is fixed.

The buzzer for a fault cannot be set
to off.

Buzzer volume

Two buzzer volumes can be selected or
the buzzer can be turned off.

Off

The buzzer tone at the end of a
program is turned off.

Soft

The tone sounds in a soft volume.

Loud

The tone sounds in a loud volume.

Select the desired volume or
deactivate the buzzer.

Confirm with OK.

Settings

Summary of Contents for EXCELLA G 2630 SCI









































































Search results

Summary of Contents for EXCELLA G 2630 SCI

Reviews:

Related manuals for EXCELLA G 2630 SCI

Brands by name

Popular brands

Miele EXCELLA G 2630 SCI, Operating Instructions Manual

Search results

Summary of Contents for EXCELLA G 2630 SCI

Reviews:

Related manuals for EXCELLA G 2630 SCI

Brands by name

Popular brands