Duration
The warming drawer is set for
continuous operation by default. By
selecting the "
Timer
" touch control a
warming time can be set. With each tap
of the "
Timer
" touch control the duration
will increase in one hour increments,
beginning with 1 hour and ending with
4 hours. Selecting "
Timer
" one more
time (equaling 5 taps) will set
continuous operating mode.
Do not leave the warming drawer in
continuous operation mode for an
extended period of time. Long
heating times will dry out the food
possibly causing it to ignite.
The warming drawer is equipped
with a safety cut-out feature which
turns the warming drawer off after
12 hours of continuous operation
(except during Sabbath mode).
Operation
^
Open the drawer.
^
Press and hold "
On/Off
" touch control
until the unit turns on.
^
Select "
Menu
" until the desired
operating mode lights up.
^
If desired select a new temperature.
Select "
Temp
." until the temperature
is reached.
The warming drawer is in continuous
operating mode.
^
To set a warming time, select "
Timer
"
until the desired number of hours is
set.
^
Close the drawer.
Once the desired pre-heating time has
elapsed, load the drawer. If tableware
was loaded during the pre-heating time
use pot holders to unload.
Open and close the drawer carefully
so that items are not spilled.
Turn the appliance off before
unloading.
Using the warming drawer
13
Summary of Contents for ESW4082-14
