background image

Installation, repair and
maintenance work should be

performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.

Hardwiring the appliance should
be performed by a certified

electrician in compliance with all local
and national codes and requirements.
The manufacturer cannot be held
responsible for the damages caused by
an inadequate electrical connection.

Before installation or service,
disconnect the power supply to the

work area by removing the fuse,
"tripping" the circuit breaker or
unplugging the unit. Pull the plug not
the cord.

Use

The plate warmer interior gets very
hot when in use and remains hot

for some time once turned off.

Use heat-resistant pot holders
when removing dishes. Be sure

that they are not damp or wet. Danger
of steam burns!

Pull the drawer out all the way
when removing dishes to avoid

touching hot drawer parts.

To prevent burns do not touch hot
surfaces, use handles or knobs.

Do not let children access the
appliance or its controls. Supervise

its use by the elderly or infirm.

Do not use the plate warmer to
reheat, cook or keep food and

drinks warm. The condensation from
food or drinks could lead to moisture
damage in the appliance.

Do not lean or sit on the warming
drawer. This will damage the

drawer. The drawer can hold a
maximum of 55 lbs (25 kg).

Do not store anything in the
warming drawer. Forgotten items

could melt or catch fire when the
appliance is turned on. Flammable
liquids and materials should never be
stored in, above or under the plate
warmer.

Do not use the plate warmer to
heat the room. Due to the high

temperatures radiated, objects left near
the appliance could be damaged.

Do not use a steam cleaner to
clean this appliance. Steam could

penetrate electrical components and
cause a short circuit. Pressurized
steam may cause permanent damage
to the surface and to components of
the appliance, for which the
manufacturer cannot accept
responsibility.

To prevent injuries, do not use
accessories not recommended by

Miele.

Do not install
outdoors.

IMPORTANT SAFETY INSTRUCTIONS

5

Summary of Contents for EGW 4060-14

























Reviews: