Miele EGW 4060-14, Operating Instructions Manual

Page: 20 / 24

Installing the appliance
^
Set the plate warmer into the niche,
push it all the way in and align it at a
right angle.
^
Open the drawer and fix the
appliance with the two supplied
screws at the side panels of the
cabinet.
The installation kit contains 3 metal
strips with adhesive on the back side.
Fix the metal strips on the plate warmer
so that the gap between the appliance
and the cabinet is sealed. This air
cushion acts as insulation.
^
Remove the protective foil from the
adhesive on the metal strip.
^
Align and fix the metal strips,
according to the illustration, flush with
the sides and the rear of the plate
warmer.
^
Install the combination appliance
according to the manual supplied
with that machine.
Installation
20