background image

Warning and Safety instructions

16

 

To prevent the risk of fire, the following textiles must not be dried

in this tumble dryer:

- Items which have been cleaned using chemicals (e.g. professional

dry-cleaning agents).

- Items which contain a large proportion of rubber, foam rubber or

rubber-like materials. For example, products made from latex
foam rubber, shower caps, waterproof textiles, rubberised articles
and items of clothing and pillows with foam rubber filling.

- Damaged items which contain padding or fillings (e.g. pillows,

jackets). When damaged, the filling can get out with the risk of it
igniting in the dryer.

 

Always close the door after use. This way you will avoid the

danger of:

- Children climbing onto or into the dryer or hiding things in it.

- Pets or other small animals climbing into it.

 

Do not let anyone sit or lean on the door, as this can cause the

tumble dryer to tip up.

 

The fluff filters must be cleaned after every drying cycle.

 

The fluff filters or the plinth filter must be thoroughly dried after

cleaning. Wet fluff/plinth filters could cause operational faults while
drying.

Summary of Contents for Eco&Steam&9kg TCR 780 WP









































































































Reviews: