background image

1

Anetsberger Brothers, Inc.

180 North Anets Drive  •  Northbrook, Illinois  60062  •  847-272-0770  •  Fax 847-272-1943

For 

ANETS

  Factory Warranty Service  •  800-837-2638

Installation,

User Operation,

&

Maintenance

Manual

Keep this Manual in a Convenient Location for Reference

WARNING

After installation of this equipment, immediately contact your local gas
supplier to obtain information about what action to take whenever any
person smells gas.  Post this information in a prominent location.

FOR YOUR SAFETY

DO NOT store or use gasoline or other flammable vapors
or  liquids  in the vicinity of this or any other appliance.

DANGER

Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury or death.  Read the installation, operating
and maintenance instructions thoroughly before installing or servicing this
equipment.

The Anets Golden Line

Quality Equipment For The Restaurant, Supermarket, and Bakery Industries

!

!

!

Form  I-102 ;

Rev. 10/01

Price: $20.00 US

Models

14G, 14GS

14GU, 14GSU,

MX-14EG, MX-14EGU

FRYER

14GS shown on standard 6”  legs

Summary of Contents for 14G

























Reviews: