![Miele DGD 4635 Operating And Installation Instructions Download Page 82](http://html.mh-extra.com/html/miele/dgd-4635/dgd-4635_operating-and-installation-instructions_236104082.webp)
Problem solving guide
82
Problem
Possible cause and remedy
After starting the pro‐
gramme, a buzzer will
sound and the
word
will appear in
the time display.
The appliance door is not closed.
Close the appliance door.
Water has appeared on
the door.
This is not a fault. At certain temperatures the pres‐
sure regulator causes steam to condense in between
the two skins of the door. This condensation then
trickles out of the area around the hinge.
After switching on the
appliance, the desca‐
ling symbol
and
appear in the function /
temperature display.
The
symbol appears
on the left of the display
and the appliance
beeps.
The appliance needs to be descaled.
Proceed as described in "Cleaning and care -
Descaling".
and
appear in
the function / tempera‐
ture display and
appears in the time dis‐
play.
The descaling process was interrupted by a power
cut or by being switched off by mistake. The appli‐
ance will automatically carry out a rinsing programme
after being switched on to flush out any residual des‐
caling agent. This process cannot be cancelled.
Wait until you have heard several beeps and the
symbol is flashing in the time display.
Now you can either restart the descaling process
or select another programme.
The power cuts out dur‐
ing a cooking process.
You would like to re‐
move the food from the
appliance.
Caution: the appliance may still be hot and under
pressure.
Pull the shelf out.
Then to release pressure from the oven compart‐
ment, use the thumb of your right hand to push
the door lock forwards
slowly, a little bit at a
time
.
Caution! Steam will escape from below and above
the door hinge.
Open the door very carefully. Danger of scalding
with hot steam.