Problem
Possible fault
Solution
The fan can still be
heard after the
appliance has been
turned off.
The appliance is equipped
with a fan that directs
vapors from the oven
interior to the outside. The
fan will continue to run for
a while after the appliance
has been turned off.
The fan automatically turns
off after some time.
You can hear a noise
(humming) when the
appliance is turned on,
when it is operating,
and after it has been
turned off.
Water is being pumped in
or out.
This noise does not
indicate a malfunction or a
defect. This happens when
water is pumped in and
out.
After moving to a new
location the appliance
no longer switches
from the heating up
phase to the cooking
phase.
The boiling point of water
has changed because the
new installation location
differs by at least 984 ft.
(300 m) in altitude from the
old.
To do this, descale the
appliance (see "Cleaning
and care - Descale").
During operation an
unusually large
amount of steam
escapes or steam
escapes from parts of
the steam oven where
it does not usually.
The door is not properly
closed.
Close the door.
The door gasket is not
seated properly.
Press the door gasket all
the way around the door to
make sure it is fitted
evenly.
The door seal is damaged,
e.g. cracks.
Replace the gasket.
The control panel
does not open/close
automatically despite
repeatedly pressing
the "Lift Panel" button.
Something is obstructing
the panel.
Remove the obstruction.
The finger pinch protection
is very sensitive, so it may
happen occasionally that
the control panel does not
open or close.
Open/close the panel
manually (see "Frequently
asked questions - Manually
opening the control panel).
If the problem occurs very
frequently, contact Miele
Technical Service.
Frequently asked questions
60
Summary of Contents for DGC 4084 XL
Page 8: ...Guide to the appliance 8 l n m o a b c e h f i j e g d k Clear Timer Lift Panel On Off ...
Page 73: ...73 ...
Page 74: ...74 ...
Page 75: ...75 ...