![background image](http://html.mh-extra.com/html/miele/da279-3/da279-3_operating-and-installation-instructions_235350019.webp)
Active charcoal filter
In recirculation mode an active char-
coal filter must be used in addition to
the grease filters. The charcoal filter is
designed to absorb cooking odors.
The active charcoal filter will be placed
in the canopy above the grease filters.
Replacement active charcoal filters
(part # 03 284 680) can be ordered
from the Miele Technical Service
Department.
USA 1-800-999-1360
CDN 1-800-565-6435
^
The grease filters must be removed
to access the active charcoal filter.
See "Cleaning and Care".
^
Two support angles must be installed
(see Installation manual to support
the charcoal filter.)
The active charcoal filter comes
boxed with 2 filters.
For best results, tightly seal the bag
containing the remaining filter.
^
Insert the charcoal filter.
Before using:
^
Program the charcoal filter timer, see
"Operation/Reprogramming the char-
coal filter timer".
Replace the active charcoal filter when
the
charcoal filter indicator
lights. Re-
place the filter at least every 6 months
or when it no longer absorbs odors effi-
ciently.
^
After replacing the charcoal filter,
press and hold the charcoal filter but-
ton for about 3 seconds to reset the
charcoal filter timer.
The indicator light will go out.
^
If the charcoal filter is replaced be-
fore the timer has reached its maxi-
mum, the charcoal filter button
should be pressed for 6 seconds to
reset the counter to zero.
Cleaning and Care
19
Summary of Contents for DA279-3
