![background image](http://html.mh-extra.com/html/miele/da279-3/da279-3_operating-and-installation-instructions_235350017.webp)
Before cleaning or servicing the
hood, disconnect it from the power
supply by either removing the fuse,
unplugging it from the outlet or man-
ually "tripping" the circuit breaker.
Cleaning the casing
Warning: Never use abrasive clean-
ers, scouring pads, steel wool or
caustic (oven) cleaners on the hood.
They will damage the surface.
^
All external surfaces and controls can
be cleaned with warm water and liq-
uid dish soap applied with a soft
sponge.
^
Wipe dry using a soft cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
^
Glass surfaces can be cleaned using
glass cleaner.
Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents e.g. pow-
der or cream cleansers,
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents.
These will damage the surface.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become discol-
ored or damaged if not cleaned reg-
ularly.
Do not use a stainless steel cleaner
on these controls.
Cleaning and Care
17
Summary of Contents for DA279-3
