Miele DA 6690 D, Operating And Installation Instructions

Page: 29 / 56

Fitting and replacing the
charcoal filters
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
This is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filters.
New charcoal filters can be
purchased from your Miele dealer,
from the Miele Spare Parts
Department or via the internet at
www.miele.shop.com.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^
Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^
Remove the charcoal filter from the
packaging and place in the recess
as shown.
^
Replace the grease filters.
When fitting for the first time:
^
Activate the operating hours counter
(see "Operation").
Always replace the charcoal filter im-
mediately if
– the Charcoal filter sensor
—
lights up
or
– it is no longer effective at absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
Resetting the charcoal filter
operating hours counter
After replacing the charcoal filters, the
operating hours counter needs to be
reset.
^
Whilst the fan is switched on, touch
the Charcoal filter sensor
—
for
approx. 3 seconds until only the 1
sensor is flashing.
The Charcoal filter sensor
—
will go
out.
If you want to change the charcoal filter
before the operating hours counter has
reached its maximum:
^
Touch the Charcoal filter sensor
—
for approx. 6 seconds until only the
1 sensor is flashing.
Cleaning and care
29