^
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
^
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
^
Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
^
If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
^
Whilst the fan is switched on, touch
the Grease filter sensor
[
for approx.
3 seconds until only the
1
sensor is
flashing.
The Grease filter sensor
[
will go
out.
If you want to clean the grease filters
before
the operating hours counter has
reached its maximum:
^
Touch the Grease filter sensor
[
for
approx. 6 seconds until only the
1
sensor is flashing.
Cleaning and care
28
Summary of Contents for DA 6690 D
