Miele DA 390-6 Operating Instructions Manual Download

Page: 6 / 48

Warning and Safety instructions



For safety reasons, this appliance may only be used after it has

been built in.



This rangehood must not be installed and operated in mobile

installations (e.g. on a ship).



Tampering with electrical connections or components and

mechanical parts is highly dangerous to the user and can cause

operational faults.

Only open the housing as described in the instructions given in the

installation sheet and in the Cleaning and care section of this

booklet. Under no circumstances should any other parts of the

housing be opened.



Faulty components must only be replaced by genuine Miele spare

parts. The manufacturer can only guarantee the safety of the

appliance when Miele replacement parts are used.



During installation, maintenance and repair work, the appliance

must be disconnected from the mains electricity supply. It is only

completely isolated from the electricity supply when:

– the mains fuse has been disconnected, or
– the screw-out fuse is removed (in countries where this is

applicable)

Summary of Contents for DA 390-6

















































Search results

Summary of Contents for DA 390-6

Reviews:

Related manuals for DA 390-6

Brands by name

Popular brands

Miele DA 390-6, Operating Instructions Manual

Search results

Summary of Contents for DA 390-6

Reviews:

Related manuals for DA 390-6

Brands by name

Popular brands