Miele DA 316 i, Operating And Installation Manual

Page: 25 / 40

2. Reducing collar
Air extraction
The appliance is designed for vent
ducting ø 150 mm.
If ø 125 mm is required:
Place the reducing collar supplied
on the vent socket and turn it to se-
cure it in position (see “Connection
for air extraction”).
If ø 100 mm is required:
Fit the ø 125 mm reducing collar
onto the vent socket. Then fit the ø
100 reducing collar over it (see “Con-
nection for air extraction”).
Recirculation
Place the reducing collar for ø 125
mm on the vent socket as described
previously.
3. Runners
Now fit the two runners into the wall unit.
Position the runners
The positioning will depend on the type
of lightshield being fitted.
Appliance fitted with a DFB lightshield:
Draw a vertical line approx. 20 cm
long on both the left and right sides
of the wall unit 100 mm in from the
front edge (see illustration).
Installation
25