^
Attach the lightshield (if using).
A DML 300 installation kit, available as
an optional accessory, is required for
this. This installation kit is supplied with
a DFB lightshield. Follow the installation
instructions supplied.
^
The position of the deflector plate
can be brought forward by up to
50 mm using the adjusting screws on
either side of the deflector plate.
Align the deflector plate to the front of
the kitchen furniture units on either
side.
^
Remove the protective strip around
the edge of the grease filter.
Replace the grease filter.
^
To do this, pull the deflector plate out.
^
Turn the grease filter so that the
red
plastic guides
are at the front and
facing upwards.
^
Replace the grease filter in the front
of the deflector plate, press it
upwards and push it in together with
the deflector plate. It will slide onto
the fixing pins at the back. Finally,
push the grease filter back a little
more.
Installation
25
Summary of Contents for DA 3060
