Ceiling plate: DA 200 / DA 200 EXT
Ceiling plate: DA 210
Ceiling plate: DA 210 EXT
Ceiling plate: DA 220 / DA 220 EXT
Address the ceiling pate and posi-
tion it exactly. The orange coloured
arrow on the ceiling plate must face
to the front of the cooker hood.
Mark the position of the four holes to
be drilled and the gap for the mains
cable.
Select the cut-out providing the shor-
test route for the mains
c
con-
nection cable to the cooker hood
chimney connector.
If the cooker hood is to be con-
nected to an external fan motor, also
mark the position of the gap for this
connection cable.
Lay a mains cable and an exhaust
connection Ø 150 mm in the ceiling
space.
If the cooker hood is to be con-
nected to an external fan motor, cre-
ate the gap for the connection cable
to the fan motor. Ensure that the
diameter is sufficient to be able to
feed through the 6-pole connector.
Installation
21
Summary of Contents for DA 200
Page 27: ...27 ...
