Electrical connection and Technical data
Electrical connection
General notes
All electrical work should only be under-
taken by a suitably competent person
in strict accordance with national and
local safety regulations.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
Connection should be made by a
double pole fused spur connection unit
(only for GB).
WARNING:
THIS APPLIANCE MUST BE
EARTHED
The data plate gives the necessary
data for connection. This is visible
when the grease filter has been taken
out.
Check that these data correspond with
the voltage and frequency of the
on-site electricity supply.
Technical data
Rated load
– DA 200, DA 210, DA 220 . . . . . 340 W
– DA 200 EXT, DA 210 EXT,
DA 220 EXT . . . . . . . . . . max. 410 W
Lighting . . . . . . . . . . . . . . . . . . 4 x 20 W
Voltage (U.K., AUS) . . . . . . . . . . . 240 V
Voltage (NZ) . . . . . . . . . . . . . . . . 230 V
Frequency . . . . . . . . . . . . . . . . ~ 50 Hz
Fuse rating (GB) . . . . . . . . . . . . . . 13 A
AUS, NZ:
Plug rating . . . . . . . . . . . . . . . . . . . 10 A
Test marks . . . . . . . . . . Electrical safety,
. . . . . . . . . . . . . C-Tick Mark
Electrically suppressed
according to . . . . . . . . . . AS/NZS 1044
Fan power
– Extraction system ø 150 mm:
Extraction power according to
DIN 44971
Air extraction . . . . . . . . . . . . . . 785 m
3
/h
– External fan:
Extraction power (unimpeded flow) de-
pending on the type of fan connected.
Electrical connection and Technical data
18
Summary of Contents for DA 200
Page 27: ...27 ...
