Miele CVA 744C Operating And Installation Instructions Download Page 41

Page: 41 / 88

User profiles

Changing a name

This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.



Select

Change name

and confirm with



Change the name as required:

– To delete a character, touch the



sensor.

– To enter new characters, highlight a

character and confirm the selection
with

– The changed name is saved by

selecting the tick



and confirming

with

Deleting a profile

This selection is only possible if a
profile has been allocated in addition
to the Miele standard profile.



Select

Delete profile

and confirm with



Select the profile you wish to delete.



Select

Yes

and confirm with

The profile is deleted.

Summary of Contents for CVA 744C

























































































Search results

Summary of Contents for CVA 744C

Reviews:

Related manuals for CVA 744C

Brands by name

Popular brands

Miele CVA 744C, Operating And Installation Instructions

Search results

Summary of Contents for CVA 744C

Reviews:

Related manuals for CVA 744C

Brands by name

Popular brands