Miele CVA 4080, Operating And Installation Manual

Page: 12 / 88

This machine can be used to prepare
espresso, coffee, cappuccino, milk
froth
and hot water .
This machine has a container for coffee
beans so that they can be freshly
ground on demand for every cup to
benefit fully from the flavour.
The ground coffee can also be
moistened with hot water
(
Pre-brewing ), to develop the aroma.
Then hot water is forced at high
pressure through the ground coffee.
If the machine is used by various
people with different tastes and
preferences, you can programme
specific settings for up to ten
individual users (User profiles)
.
You can also add a portion of ready
ground coffee should someone prefer
a cup of decaffinated coffee, for
example.
To prevent water from remaining in the
pipes, any water left is expelled,
resulting in a little trickle after the coffee
has been dispensed. The coffee is then
ready.
The used
coffee grounds
are
automatically emptied into the waste
container. There is no need to remove
the grounds manually after each cup.
The size of cup can be programmed so
that the correct amount is dispensed. If
you decide to use a smaller cup than
the
programmed cup size , preparation
can be halted at any time by pressing
"
+
C".
If two cups of coffee or espresso are
required at the same time, the sensor
next to "2 portions" must be pressed
twice briefly. The machine will fill the
cups in two stages with a slight pause
in between.
The machine can be programmed to
grind from 6 to 14 g of coffee,
depending on the type. The
programmed
amount of coffee will be
the same for all sizes of cup (espresso,
coffee, cappucino).
The fineness to which the coffee is
ground can be adjusted.
The lighting can be switched on
independently of operation. The upper
and lower lighting can also be dimmed
independently of one another.
For safety reasons, the electricity
supply to the brewing system and the
coffee grinder cuts out when the
machine door is opened. The machine
also features a
system lock to prevent
children from operating it.
The easy to use programming facility
allows, amongst other things, the
language in the display to be changed
and the water hardness to be
programmed in.
Brief description
12