Miele CVA 4080 Operating And Installation Manual Download Page 46

Page: 46 / 88

Now change the name and touch the sensor beside "ok".

Change

You can programme the machine so that it always reverts to
the Standard profile or so that it continues to operate using a
User profile you have set.

To set the profile to be used:

touch the sensor beside "Change".

You can now select one of the following:

Do not change

The machine will continue to operate using the User profile
you have selected until you select another User profile.

When switched on

Each time the machine is switched on it will automatically
select the Standard user profile regardless of which Profile
was set before the machine was last switched off.

After each use

The machine will automatically revert to the Standard User
profile each time a drink is dispensed.

Selecting a user profile

In the main menu

touch the sensor beside "Standard" and

then touch the sensor beside the Profile you wish to set.

Then touch the sensor beside "ok".

Settings: Customising your machine

Summary of Contents for CVA 4080

























































































Search results

Summary of Contents for CVA 4080

Reviews:

Related manuals for CVA 4080

Brands by name

Popular brands

Miele CVA 4080, Operating And Installation Manual

Search results

Summary of Contents for CVA 4080

Reviews:

Related manuals for CVA 4080

Brands by name

Popular brands