Miele CVA 3660 Operating And Installation Instructions Download Page 49

Page: 49 / 84

You can now select one of the following:

Manual

The coffee machine will store and operate using the user
profile you have selected until you select another one.

Select "Manual" with the arrow sensors and touch the OK
sensor.

After each use

The machine will automatically revert to the Standard user
profile each time a drink is dispensed.

Select "After each use" with the arrow sensors and touch
the OK sensor.

When switched on

Each time the machine is switched on it will automatically
select the Standard user profile regardless of which user
profile was set before the machine was last switched off.

Select "When switched on" with the arrow sensors and
touch the OK sensor.

A tick will appear beside the setting currently selected.

Setting up user profiles

Summary of Contents for CVA 3660





















































































Search results

Summary of Contents for CVA 3660

Reviews:

Related manuals for CVA 3660

Brands by name

Popular brands

Miele CVA 3660, Operating And Installation Instructions

Search results

Summary of Contents for CVA 3660

Reviews:

Related manuals for CVA 3660

Brands by name

Popular brands