Miele CVA 3660 Operating And Installation Instructions Download Page 18

Page: 18 / 84

Please note that the individual capsules sit loosely in the
capsule carousel to prevent them from becoming jammed.

If you have removed the capsule carousel, place it onto the
carousel runners before putting it back into the machine.
You do not have to position it in a particular way, as the
machine will automatically guide it into position.

Push the carousel runners fully back into the machine.

Close the door.

The machine will now align the capsule carousel. You will be
able to hear this happening.

Taking capsules out of the capsule carousel

If you want to change the capsules in the carousel:

Pull the carousel runners out.

Lift the capsule carousel upwards to remove it.

Push upwards on the ring underneath the magazine and
then remove the capsules.

Filling the machine with water and coffee capsules

Summary of Contents for CVA 3660





















































































Search results

Summary of Contents for CVA 3660

Reviews:

Related manuals for CVA 3660

Brands by name

Popular brands

Miele CVA 3660, Operating And Installation Instructions

Search results

Summary of Contents for CVA 3660

Reviews:

Related manuals for CVA 3660

Brands by name

Popular brands