Miele CS 1312 Operating And Installation Instructions Download

Page: 11 / 48

Installation, maintenance and repairs may only be

carried out by a suitably qualified and competent
person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could
be dangerous. Miele cannot be held liable for
unauthorised work.

During installation, maintenance and repair work, the

grill must be disconnected from the mains electricity
supply.

While the grill is under guarantee, repairs should

only be undertaken by a service technician authorised
by Miele. Otherwise the guarantee is invalidated.

Faulty components must only be replaced by

genuine Miele original spare parts. The manufacturer
can only guarantee the safety of the appliance when
Miele replacement parts are used.

If the connection cable is damaged, it must be

replaced by a suitably qualified electrician with a
special connection cable of type H 05 V V-F (pvc
insulated), available from Miele.

The grill is not intended for use with an external timer

switch or a remote control system.

Warning and Safety instructions

Summary of Contents for CS 1312

















































Search results

Summary of Contents for CS 1312

Reviews:

Related manuals for CS 1312

Brands by name

Popular brands

Miele CS 1312, Operating And Installation Instructions

Search results

Summary of Contents for CS 1312

Reviews:

Related manuals for CS 1312

Brands by name

Popular brands