Installing the appliance(s)
^
Feed the power cord down through
the cut-out.
^
Place the front edge of the appliance
into the cut-out.
^
With a hand on each side of the
appliance press down evenly on the
edges until it clicks into position.
When doing so make sure that the
appliance seal sits tightly on the
countertop to ensure it is sealed
correctly. This is important to ensure
an effective seal.
Do not
permanently
seal into the countertop.
^
Push the installed appliance to the
side until the holes in the support bar
are visible.
^
Insert the cover
d
into the holes in
the support bar
b
.
^
Place the front edge of the next
appliance into the cut-out.
^
Connect the appliance(s) to the main
power supply (see "Electrical
connection").
^
Turn the appliance(s) on and check
the function.
The appliance may be lifted out
using a special tool.
The appliance can also be pushed
up and out from underneath.
Note: push the rear out first.
Installation
41
