Miele Complete C3 Comfort Electro PowerLine, Operating Instructions Manual

Page: 53 / 68

17
Using for the first time
Pressing the - button will directly select
the lowest setting, pressing the + but-
ton the highest setting will be selected.
After that the vacuum cleaner will
switch on at the setting which was used
previously.

To do this, press the Standby button
 on the Comfort handle.
To regulate the suction power
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the Comfort handle which indicate the
type of use the settings are suitable for.
The selected power level will light up
yellow.
 Curtains, fabric
 Upholstery, cushions

Deep pile carpets, rugs and run-
ners
 Energy-saving vacuuming. This
setting is also very quiet
 Loop pile carpet and rugs
 Hard flooring and heavily soiled
carpets and rugs
When using the Electrobrush / floor-
head, if the suction seems too high,
reduce the suction until the Electro-
brush / floorhead is easier to man-
oeuvre.
Depending on the model, your vacuum
cleaner will be fitted with the following
suction power selector:
Auto suction power is automat-
ically adjusted for the type
of floor being vacuumed

Do not use the “Auto” setting to
vacuum lightweight materials or cur-
tains. These could be sucked in and
possibly damaged.