Miele Complete C3 Comfort Electro PowerLine, Operating Instructions Manual

Page: 55 / 68

19
erate using suction only. This is useful
when moving from vacuuming a fitted
carpet to a rug, for example.
Interrupting operation
The vacuum cleaner can be paused for
short breaks whilst vacuuming.

To do this, press the Standby button
 on the Comfort handle.

The Standby button is designed
to pause the vacuum cleaner for
short periods of time whilst vacuum-
ing. Do not leave the vacuum cleaner
in Standby mode for long periods.
Otherwise there is a risk of overheat-
ing and damage.
Setting down, transportation
and storage
Park System for pauses during vacu-
uming
(cannot be used with the Electrobrush)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during pauses.
 Slot the floorhead or floorbrush into
the parking attachment on the va-
cuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, retract the
telescopic tube fully.
Switching on and off with the Park
system
The vacuum cleaner switches off auto-
matically when the floorhead is slotted
into the park system with the park at-
tachment.
Park System for storage

Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.

Stand the vacuum cleaner upright.
Retract the telescopic tube fully so
that the vacuum cleaner takes up less
room for storage.