Miele B 3312 Operating Instructions Manual Download

Page: 60 / 80

Cleaning and care



Wash and dry the ironing board cover
according to the care label or replace
the cover if it is damaged.

Never use the steam ironing system
without the ironing board cover in
place.



Put the dry or new cover onto the
ironing board from the tower end first
and draw it down towards the
tapered end of the ironing board.



Use the cord to pull the cover taut.
Ensure the cover is secure.



Secure the ironing board cover in
position by pushing the small toothed
wheel on the fastener to the middle.



Push the fastener back into the cavity
at the tip of the ironing board.

Cleaning the water filter

The water filter prevents foreign
objects in the water from entering the
steam ironing system and causing
damage.

The water filter can be cleaned if it is
dirty or clogged. You will notice if the
water filter is dirty since this will cause
more frequent pumping noises from the
water feed pump.

Disconnect the power supply



Switch off at the wall socket and
withdraw the plug before cleaning the
water filter.

Removing the water container



Hold the water container by its
handle.



Pull the handle downwards.

The water container will release from
the retainer.



Pull the water container upwards and
out.

Summary of Contents for B 3312

















































































Search results

Summary of Contents for B 3312

Reviews:

Related manuals for B 3312

Brands by name

Popular brands

Miele B 3312, Operating Instructions Manual

Search results

Summary of Contents for B 3312

Reviews:

Related manuals for B 3312

Brands by name

Popular brands