manualshive.com logo in svg

Miele B 3312, Operating Instructions Manual, Page: 41 / 80

Share
Download
Miele B 3312 Operating Instructions Manual Download Page 41

Steamer

41

Using the steamer

Danger of burning due to hot

steam!
Never direct the steam or the steam
jets at people, animals or electrical
appliances of any kind.
Never point the steam at clothing
while the clothes are being worn. The
clothing will intensify burning of the
skin.

The emission of steam is controlled by
the 

 button on the steamer.

Useful tip: 

Always steam the fabric in

the direction of the fibres.

Using short bursts of steam

Briefly press the 

 button.

Then release the button.

Using continuous steam

Press the 

 button.

Keep the button pressed in.

Stopping the continuous steam
function

Release the 

 button.

If you take a break from steaming,
condensate may collect in the steam
hose. Press the 

 button to expel the

condensate from the hose.

The optimum distance between the
steamer and the fabric depends on
the sensitivity of the fabric and can
vary from one fabric to another.
Always try it first on an
inconspicuous part of the fabric.

Summary of Contents for B 3312

















































































Reviews:

No comments