![background image](http://html.mh-extra.com/html/miele/au/au_operating-instructions-manual_234511056.webp)
The dishwasher does not fill/drain.
Problem
Possible cause
Remedy
The Inlet/Drain
indicator light
flashes.
The tap is turned off.
Turn on the tap fully.
The dishwasher
stops during a
programme.
The Inlet/Drain
indicator light
flashes.
Fault code FXX
appears in the
display.
Before rectifying the problem,
you must:
– Switch the dishwasher off with
the On/Off button
K
.
Fault F12/F13:
Water intake is
restricted.
– Turn on the tap fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
Fault F11:
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
– Clean the filter combination
(see "Cleaning and care").
– Clean the drain pump (see
"Maintenance").
– Clean the non-return valve
(see "Maintenance").
– Remove any kink in the drain
hose.
Problem solving guide
56
Summary of Contents for AU
Page 65: ...Upper basket Lower basket Cutlery tray Comparison tests 65 ...
Page 77: ...77 ...
Page 78: ...78 ...
Page 79: ...79 ...