Top-up rinse for H
95°C and Pillows hygiene 95°C
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Top-up rinse should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse deactivated.
Follow steps
A
to
G
to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The drum door is closed.
– The programme selector is at
Finish
.
A
Press the additional option buttons
Intensive
and
Rinse plus
at the same
time, hold pressed in and . . .
B
. . . switch the machine on with the
I-On/0-Off
button.
C
Let go of all these buttons.
P 0
appears in the display.
D
Turn the programme selector to
Pillows hygiene 60°C
:
E
The
P
will now flash in the display
alternating with the number
10
.
In addition, one of the following will
appear on the right of the display:
0
= Top-up rinse is deactivated
or:
1
= Top-up rinse is activated
F
Press the
Start
button to change the
display from
0
to
1
or from
1
to
0
.
G
Switch the washing machine off with
the
I-On/0-Off
button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
67
