en - Guide to the appliance
42
LED indicator
The LED indicator (light emitting diode) provides status information
about the communication module.
LED
Status
Lit up GREEN
Connection to the network was successful. The
module is ready for operation.
Lit up YELLOW
Network is configured but there is no connec-
tion to the network.
Lit up RED
The module is not configured.
Off
Power is not being supplied to the module.
Check that the module is in the correct position
in the module slot.
Button
The button on the module has several functions.
WPS button
The WPS button can be used to establish a WiFi connection between
the module and your router or repeater (WPS, WiFi, Protected Setup).
WPS-enabled routers or repeaters must be used.
Reset button
The button on the module can be used to reset the module to the
factory default settings.
Press the button for approx. 5–9 seconds to restore the factory de-
fault settings.
Summary of Contents for 68822103D
Page 2: ...2 da 4 de 21 en 38 es 55 fi 72 fr 89 it 106 nl 123 no 140 pt 157 sv 174 ...
Page 190: ......
Page 191: ......
