Miele 11395240 Operating And Installation Instructions Download Page 82

Page: 82 / 84

Supervisor level

Feedback signal to pay system

Setting the feedback signal for the
coin box.

- Factory default: Off

- End of programme

The feedback signal is sent at the
end of the programme.

- Release of the start button

The feedback signal is sent when the
start button is released.

- Start and programme end

The feedback signal is sent at the
start and end of the programme.

- Programme running

The feedback signal is sent con-
stantly between the start and end of
the programme.

Delete paid signal

The “Paid” signal in coin box mode
can be applied until the end of the
programme or discarded if the pro-
gramme is not started after 5 minutes.

Factory default: Off

FOC programmes

In coin mode, you can decide whether
the

Drain/Spin

programme can be used

for free.

Factory default: Off

Payment system lock

To avoid tampering, a programme lock
can be set up in programme control. If
the lock is applied, the programme is
interrupted and payment credit is lost
as soon as the door is opened.

The time for the lock to be applied can
be adjusted to enable laundry to be ad-
ded.

- Off

- As soon as the programme starts

- 1 minute after the start of the pro-

gramme

- 2 minutes after the start of the pro-

gramme

- 3 minutes after the start of the pro-

gramme (factory default)

- 4 minutes after the start of the pro-

gramme

- 5 minutes after the start of the pro-

gramme

Summary of Contents for 11395240





















































































Search results

Summary of Contents for 11395240

Reviews:

Related manuals for 11395240

Brands by name

Popular brands

Miele 11395240, Operating And Installation Instructions

Search results

Summary of Contents for 11395240

Reviews:

Related manuals for 11395240

Brands by name

Popular brands