![background image](http://html.mh-extra.com/html/miele/11070970/11070970_operating-instructions-manual_234494111.webp)
Settings
111
Running a RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be
provided in the Miele@mobile app.
A message will appear in your dish-
washer display if a software update is
available.
You can install the update immediately
or postpone it until later. When the ap-
pliance is switched on again, you will be
reminded about the update.
Switch RemoteUpdate off if you do not
wish to install updates.
Updates may take several minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
an update is available.
– Once an update has been installed, it
cannot be undone.
– Do not switch the dishwasher off dur-
ing the update. Otherwise, the up-
date will be aborted and will not be
installed.
– Some software updates can only be
carried out by Miele Service.
SmartStart
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
“Settings” chapter, “Miele@home”
section)
The
SmartStart
function is used for start-
ing your dishwasher automatically at a
time when your energy costs are most
economical.
To use this function you may need fur-
ther technical accessories.
If you have activated
SmartStart
Permit-
ted
, the Timer
menu of the selected
programme will no longer show
EcoStart
but will instead show
SmartStart
. The
dishwasher will then start within the
timeframe specified when it receives a
signal from the energy supplier.
If it has not received a signal from the
energy supplier by the latest possible
start time, the dishwasher will start
automatically.