Miele 11070970 Operating Instructions Manual Download Page 65

Page: 65 / 120

Programme options

Selecting programme options

You can use programme options to ad-
just the programmes.

To do this, you can select or deselect
the programme options in the pro-
gramme menu of a selected programme
before running it.



Open the door.



Switch the dishwasher on using the



sensor control.

The sensor control for the selected pro-
gramme will light up.



Select a different programme as re-
quired.



Touch the sensor control for the pro-
gramme option you want.

The appropriate sensor control will light
up when the programme options are
available for the selected programme.

If the programme option is not compat-
ible with the selected programme, a
message to this effect will appear in the
display.



In this instance, confirm the message
with



Start the programme by closing the
door.

The selected programme option will re-
main active for that particular pro-
gramme until the setting is changed.

IntenseZone



The



IntenseZone

option increases

cleaning performance in the lower bas-
ket.

Energy consumption increases slightly
due to the extended wash duration in
the lower basket and increased temper-
ature.

Express



The



Express

option reduces the

programme duration.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme dura-
tion is shortened varies according to the
selected programme.

Selecting the



Express

option may

take precedence over other selected
options.

When used in combination with the

QuickPowerWash

programme, the



Express

option results in a wash

programme designed solely for the
purpose of flushing out the cabinet to
remove saline solution that leaked out
after refilling the salt reservoir.

Summary of Contents for 11070970

























































































































Search results

Summary of Contents for 11070970

Reviews:

Related manuals for 11070970

Brands by name

Popular brands

Miele 11070970, Operating Instructions Manual

Search results

Summary of Contents for 11070970

Reviews:

Related manuals for 11070970

Brands by name

Popular brands