Miele 09 741 510 Operating And Installation Instructions Download

Page: 70 / 84

Slide the hoses back onto the angle
section and reinsert it. Make sure that
the bridge on the angled section
faces down.

Reinsert the air intake hose into the
opening

Step 3: Cleaning the milk
pipework in the main
dispenser

Remove and disassemble the
dispensing unit as described in
"Cleaning and care – Main
dispenser".

Rinse all parts carefully under
running water.

Use the cleaning brush to clean all
parts

carefully

. Do not use a needle

or similar object to avoid piercing
the silicone parts.

Reassemble the dispensing unit and
reinsert it into the main dispenser.

Replace the cover.

Step 4: Milk valve maintenance

Tap

Tap the arrow key

until

"Maintenance" is highlighted.
Tap the OK button.

Tap the arrow keys until "Condition
milk valve" is highlighted. Tap the OK
button.

The milk valve will go into maintenance
position.

Important! Before you confirm
"Leave maintenance position" with
"OK", you

must

remove the cleaning

brush. Otherwise, the coffee
machine will be damaged.

Insert the brush into the milk valve.
Move the brush back and forth.

Tap the OK button.

The milk valve will move into the stan-
dard position and the milk lines are
rinsed.

Cleaning clogged milk pipework

Summary of Contents for 09 741 510





















































































Search results

Summary of Contents for 09 741 510

Reviews:

Related manuals for 09 741 510

Brands by name

Popular brands

Miele 09 741 510, Operating And Installation Instructions

Search results

Summary of Contents for 09 741 510

Reviews:

Related manuals for 09 741 510

Brands by name

Popular brands