Cleaning the spray arms
From time to time, particles may
become trapped in the spray arm jets.
The spray arms should be inspected
and cleaned every 4 - 6 months.
Remove the spray arms as follows:
^
Unscrew the
upper
spray arm.
^
Unscrew the
middle
spray arm
(under the upper basket) clockwise
at the knurled nut
.
The knurled nut has a left hand thread.
To unscrew the spray arm turn the nut
and the spray arm to the right.
^
Remove the
lower
basket. Pull the
lower spray arm firmly upwards to
remove.
^
Use a sharp pointed object to push
particles into the spray arm jets and
rinse thoroughly under running water.
^
Open the cap of the
lower
spray
arm, by turning it clockwise, to rinse
out particles.
^
After cleaning close the cap tightly.
^
After replacing the spray arms check
that they rotate freely.
Machine care
38
