Program
When to use
Program cycle
Pre-
wash
1 2
Main
wash
1)
Interim
rinse
1 2 3
3)
Final
rinse
1)
Drying
(Option.
funct.)
CHINA +
CRYSTAL
120°F
For temperature sensitive glassware
and lightly soiled dishware.
Run-time: ~ 12 minutes*
(plus 10 minutes for optional drying)
X
X (X)
X
(X)
RAPID
130°F
Rapid program for continuously used
dishes.**)
Powder detergent: Place detergent
directly on the right hand side of the
door interior,
NOT
in the detergent cup.
Run-time: ~ 10 minutes*
X
(X)
2)
X
**)
SHORT
130°F
Quick program for lightly soiled
dishware, e.g. party dishware or to
remove salt traces from the wash
cabinet after refilling salt.
Run-time: ~ 15 minutes*
(plus 10 minutes for optional drying)
X
(X)
X
(X)
Powder detergent dosage:
1 ½ tablespoons (20 grams) in the detergent
dispenser. Follow manufacturers instructions if they differ.
*) Run times dependent on incoming water pressure and temperatures
**) Important information for the "Rapid" program
At the end of the program, the final rinse water is not drained away. It is used for
the following "Rapid" program as wash water. If the operation is interrupted for a
longer time or another program is desired:
^
Select the program "DRAIN". The final rinse water is drained away.
X = Sections included in the program (with temperature/temperature holding time)
1)
Temperature or temperature holding time adjustment
(see "Programming special functions").
Important: To clean dishes with soiling it is recommended to program a
wash temperature of 140°F (60°C).
2)
To select an economy interim rinse see "Programming special functions".
3)
To select a second interim rinse see "Programming special functions".
Program guide
27
