Operation
Programme end display
After water from the last heating phase has
drained away, or after the last "Cool Down"
the programme end time is shown in hours
and minutes.
Programme end - to open the drum door
At the end of the Programme, with a stationary
drum and no more water in the machine
the following display is shown (for example):
Pull the handle to open the door.
Note: If the door cannot be opened, press
against the door, and pull on the handle
again. Never use force to open the door.
Remove the laundry.
If the programme is interrupted when there is
water in the machine, or during the spin, the
following display messages might appear:
or:
The door is locked. Never try to force open
the door. See "Problem solving guide".
Programme 13 Cold draindown
This programme is designed for use in cold
climates when there is a danger of water
freezing during shut-down periods.
Ensure that the water supply pump system is
turned off and that the water supply is drained
down before selecting this programme.
At the end of the cold draindown programme
the two plugs must be removed from the drain
off points at the rear of the machine. Place a
suitable container under the plugs to collect
the residual water.
These two plugs must be screwed back into
position again before using the machine
again. Do not overtighten them!
PROGRAMME
1
Universal 50°C
Rinse 1
Rinse 2
Programme end
11 : 25
hrs
à
PROGRAMME
1
Universal 50°C
PROGRAMME END
DOOR IS UNLOCKED
PROGRAMME
1
Universal 50°C
PROGRAMME END
DOOR IS LOCKED
THERE IS WATER IN THE MACHINE
PROGRAMME
1
Universal 50°C
PROGRAMME END
DOOR IS LOCKED
DRUM NOT YET STATIONARY
«M.-Nr. 06 411 840 - GB - »
12
Summary of Contents for WS 5240
Page 2: ... M Nr 06 411 840 GB 2 ...
Page 26: ... M Nr 06 411 840 GB 26 ...
Page 50: ...M Nr 06 411 840 D 50 ...
Page 51: ...51 M Nr 06 411 840 D ...