Troubleshooting
38
Heating system fault
Programme stopped. Press start.
Programme will continue without heat.
Press the "START" button to continue the programme without
heating.
Useful tip:
Disinfection programmes will be cancelled if this fault
message appears.
Call Miele Professional Service.
Drive motor fault
Programme stopped. Press start.
Motor overheating.
Allow the motor to cool down.
Too large an imbalance. The imbalance switch has been triggered.
Imbalance fault
Call the Service Department
if restart does not work.
Switch the machine off and back on again and press "START".
Drain valve fault
Call the Service Department
if restart does not work.
Check the on-site drain system and press "START".
A defective drain valve must only be repaired by Miele Professional
Service.
Dispensing system fault
Fill dispenser 1.
Press the start button.
Change the dispenser container.
Card fault
Card incorrectly inserted in card reader.
Insert the card into the card reader correctly.
Summary of Contents for PW 413 SES
Page 73: ...73...
