Starting at the back of the carrier, place the
Plastic Top on the Plastic Bottom, aligning the
tabs on the Plastic Top with the holes on the
Plastic Bottom around the carrier’s perimeter.
Slide the Top slightly forward until it clicks into
place on the Plastic Bottom.
3.
Turn the Knobs 90 degrees clockwise to lock the
top and the bottom together.
4.
Insert the four Door Hinges at the top and
bottom of the carrier’s opening. Note: This
step can also be completed at the beginning,
before Step 2; either way is fine and will not
affect assembly. Simply place them in the
hinge holes and press down until they click
into place.
5.
3
4
5
The Hinges allow the door to be inserted, removed, or opened left-to-right or right-to-left. Simply
twist the hinges to the open and closed position as needed.
6.
Open
Closed