STEP 12
To disassemble the turbine, place the drive ring raceway over the largest hole
on your work block (as shown). Then put your Lares disassembly tool
(00024L1) into the end of the motor spindle. Press the spindle and tool
through the raceway.
STEP 13
Now turn the partially disassembled raceway over (see picture). The front
motor bearing must be removed from the raceway. Use your Lares
assembly tool (00024L2) to punch the bearing out of the raceway. Always
replace these motor bearings when performing an overhaul. Place all of your dirty or
fouled parts in the ultrasonic cleaner.
Picture
Number
Part
Number
Description
1 40446C
Turbine
Retainer
2 40438
Narrow
Drive
Rings
3
40446
Drive Ring Raceway
4 40442
Turbine
Spindle
5
40433
Front Turbine Bearing
6 40454
Impeller
7
40405C
Rear Turbine Bearing
8 20115
Allan
Screw
9
40424
1-Speed Turbine Housing
10 404072
O-Ring
11
40501
Shorty Vent Plug (pictured)
