Parts 1 thru 5 of the Exploded View 1 can be exposed by removing a c-clip from
inside the top of the motor housing. If you do remove these items, it is best to clean
them and apply some grease to the planetary gears before reassembly.
STEP 5
Now we will disassemble the motor
canister. Remove the canister o-ring
and place the canister into a collet
and secure. Now place the tips of a
set of 45- degree needle nose pliers
into the two holes in the top plate of
the canister (far left picture). This plate is standard thread
so turn it counterclockwise to unscrew. Once the top plate is loose, lift it off the motor
and remove the canister from the collet by lifting the outer edges. If you grab the drive
gear, you will spill blades and springs about.
Picture
Number
Part
Number
Description
1
N/A
Motor Canister Top Plate
2
N/A
Gear and Rotor Assembly
3
40420
Rotor Blades
4
10019
Rotor Blade Springs
5
40520RH
Rotor Housing
6
N/A
Rear Motor Plate
7
N/A
Motor Canister Housing
8
N/A
Canister O-Ring
None
40405C
Internal motor bearings
