DETAIL B
B
DRAWING
REV
-
INS-201004
S
-
SERIES
SHELVING
PAGE
E
N
G
L
IS
H
CONCRETE
MASONRY
(Bloc of concrete,
brick,etc)
WALL WITH
WOOD UNIT
WALL WITH
METAL UNIT
SELF TAPPING
SCREW FOR
DRY-WALL TO
EACH METAL
UNIT
COMPRESSION
SCREW FOR
EACH WOOD
UNIT
AUTO
THREAD
SCREW IN
SOLID
EQUIPMENT
CORNER
ATTACHMENT
FOR
CONCRETE
METHODS TO FIX THE BLOCK WALL
DETAIL FOR THE ANCHOR BRACKETS
THE ANCHORAGE ON ALL SECTIONS OF THE WALL UNIT IS
RECOMMENDED TO LIMIT THE DEFLECTION WHEN THE
SYSTEM IS LOADED. IT IS ALSO NECESSARY WHEN THE
HEIGHT OF THE FIXATION IS EXCEEDED THE DEPTH BY
REPORT OF 6 TO 1. ANCHOR NOT INCREASE THE CARRYING
CAPACITY FROM AN UNBALANCED SYSTEM.
THE BUYER OF THE WALL UNIT IS RESPONSIBLE TO BE
DETERMINED THE RELEVANCE OF A WALL OR A SPECIFIC
STRUCTURE TO WHICH THE LAYER IS ROOTED, FOR THE
SELECTION AND A PROPER FIXATION OF ANCHOR,
EQUIPMENT AND MATERIALS TO CREATE THOSE ANCHORS.
THESE GUIDELIGNES ARE INTENDED TO ILLUSTRATE THE
TYPES OF A TYPICAL ANCHORS AND DOES NOT CONSTITUTE
AN ENDORSEMENT BY ETALEX FOR ANY SPECIFIC REQUEST
ANCHOR. EACH APPLICATION MAY VARY DUE TO THE
STRUCTURE OF THE BUILDING AND MATERIALS USED FOR
ANCHOR. THE PROFESSIONAL ADVICE OF QUALIFIED
ENGINEER BE SEARCHED FOR EACH INSTALLATION ROOTED.
FOR INFORMATION, THE ANCHORAGE MUST BE LOCATED AS
SHOWN IN THE PISTURES. THE ANCHORAGE SITUATIONS
OTHER THAN THOSE SHOWN MAY BE MET
AN EXTREME
CARE SHOULD BE TAKEN TO ENSURE THAT THE WALL OF A
BUILDING OR OTHER STRUCTURE IS SECURED PROPERLY TO
ANCHOR AND SUPPPORTING THE LOAD BEING ROOTED.
WARNING
DO NOT USE PLASTIC OR ANCHORAGE FIBER OR CONCRETE SCREW OR SCREW REGULAR.
INFORMATION FOR ANCHOR
BLOCK 2"X4"
HEIGHT
BLOCK
2" X 4"
BLOCK
2" X 4"
BLOCK
2" X 4"
BLOCK
2" X 4"
WALL
WOOD BLOC
2" X 4"
ANCHOR BAR
SELF TAPPING PAN
SOCKET 18 X 1" L
ITEM#16
WOOD SCREW PAN
SOCKET
NO 8 X 1 1/2" L X 2
ONLY REQUIRE FOR THE WALL UNIT
INSTALL THE WALL ANCHOR BRACKET (ITEM#15) ON THE WALL AT THE TOP OF EACH
POST (UPRIGHT). INSERT THE TOOTH OF THE ANCHOR IN THE FIRST SLOTS FROM THE
BACK BY TURNING IN THE POSITION UPRIGHT. AS SOON THE TOOTH IS IN PLACE, PUT IT
BACK ON THE HORIZONTAL POSITION AND FIX IT WITH THE WOOD SCREW NO 8 X 1 1/2" L.
OTHER OPTION: THE WALL ANCHOR BAR FOR EACH WALL SECTION.
METHODS TO FIX
THE BLOCK
STRUCTURE WITH
ANCHOR WALL
6
OF
12
